Modelismo y CNC en ingles

Hi everyone,

Anyone here using a Amada LC1212 Alpha II still? I am working for a company that have one of this unit, in pieces ATM. We want to get it up and running. I am after any manuals and software, if anyone here wants to share. Any advice on how to run it will be most welcomed.

Thank you.

Learner2

Hi,

I am new to Alphacam add-in development.
I have tried a couple of macros for Alphacam using VBA.
I am now moving towards add-in creation for Alphacam using visual studio. But I am not able to find suitable material or any example for it.
Any help would be appreciated here?

Hi,

I wish to do a job requiring 2 tools in 3 Work Coordinates System (WCS) : G54, G55 and G56.
Tool 1 must work in each WCS before changing to Tool 2.

I use the option "Multiple WCS Offsets / Order by Tool" of the Setup in Fusion 360.

I observe that the tool change induces a vertical offset of tool 2.
This offset is precisely the difference between length compensations of tool 1 and tool 2.
This difference is even doubled after the milling of the G55 to G56.

e.g.
Tool 1 Length Compensation -130,00
Tool 2 Length Compensation -133.50
Compensation difference = 3,50

DRO Work_offsets at the end of the program:
G54 X0.00 Y 0.00 Z0.00
G55 X0.00 Y15.00 Z3.50
G56 X0.00 Y30.00 Z7.00
(The 3 Work_offsets are Y-aligned and spaced 15.00).

I'm using Fusion 360 with Mach3, PostProcess Mach3mill_43262

I tried to solve the problem by making changes in the program and looking for good advice on forums, but still unresolved.

I would be grateful for if you could support me for this problem.

Guillaume

Gweike Cloud, home laser engraving machine ,It's designed for home/shcool/office creation, and with it, you can do laser printing quickly and easily.

Now only$2999 including tax and door-to-door fee!!!!!

It is currently restricted to EU countries.

Welcome to check out our website to learn more about the Gweike Cloud: https://www.gweikecloud.com/#/

You can also contact me: my e-mail is alec@wklaser.com ; my whatsapp is +86 178-6052-1728

I'm trying to mark graduations on the bevelled edge of a disc? I'm making a degree vernier, how do I go about getting the lines on the bevel at the correct angle, the disc has a 60° bevel about .4 wide. The numbers would be good too but not essential.

Hello. I'm looking for electrical diagram for a Blohm Simplex 7 surface grinder.
I have a manual and some wiring diagram. Relay numbering does not match.
Thank you for any help. karel3

Hi, was wondering if anyone can help we just acquired this machine but did not come with a manual and need some help hooking it to power not sure if it’s high voltage or low voltage. So if anyone has a manual it will be a big help to get this thing up and running thanks.

HI
I am looking for a free or affordable CAM program for an xyzbc router that the fairies have made in my workshop. I have tried the cnc toolkit but can't seem to get it to work. Can anyone suggest a program I can use. I want to try and machine wooden busts from stl files.
Thanks

Hello - I'm fairly new to CNC. Just finished my build. Trying to layout a backsplash that is lots of custom and unique curves and spirals. I took a a stab at it in V-Carve pro and have access to autocad as well but not quite what I am envisioning. Any suggestions to get from this

1st try.jpg

To this

il_1140xN.2675794030_onq1.jpg

Filigree-jpg__33895.1541503602.jpg

biggest thing for me is not being able to generate long smooth curves or nurbs... Do I have to use rhino or illustrator? Anyone have any success with designs like this in V-Carve pro or autocad?

Thanks!

Attached Images

• Filigree-jpg__33895.1541503602.jpg‎ (135.3 KB)
• il_1140xN.2675794030_onq1.jpg‎ (346.9 KB)
• 1st try.jpg‎ (15.7 KB)

Hello,
I have just acquired a little 2nd hand CNC 3018 Pro CNC/Engraving machine.
Got it home, installed driver plus UGS Universal Gcode Sender and machine seems to work on all axis just fine.
So now i need some hopefully freeware to generate gcode for this little machine from STL files I have created with Alibre Design.
What i want to do mostly cutout Perspex/Wood sheet and maybe a little 3 axis surface machining on Perspex/Wood.
Many thanks IMK

The development team is pleased to announce version 1.9.2 of the RosettaCNC software downloadable from the download page:

https://rosettacnc.com/en/download-cnc.html

Changelog 1.9.2 vs 1.9.1

• Added Custom Values management for custom firmware.
• Added support of M109/M120 P100 Rr mode for multiple entry parameters dialog.
• Added new Tilting-Head A/B Kinematics management (see Board Settings -> Axes).
• Added Probe Analogic Input value visualization in Board Settings -> Digitalizer Panel.
• Added new Program Settings -> Compiler -> Macro sheet to define user macros path.
• Added new Top Toolbar Jog Mode button (see Program Settings -> Top Toolbar to set).
• Added CNC Board Warnings managements:
  
  • Added new menu View -> Show Warnings.
  • Added new menu View -> Show Warnings History.
  • Enabled panel Warnings [ From Inputs ] in Program Settings -> Custom Alarms panel.
  • Enabled panel Warnings [ From Modbus ] in Program Settings -> Custom Alarms panel.
  
  
• Improved DRO visualizations removing the Axes used as Gantry Slaves.
• Improved analogic input values visualizations.
• Improved CNC Board STOP -> RESUME management.
• Improved DRO visualizations removing the Axes used as Gantry Slaves.
• Improved GCode language and compiler:
  
  • Added support user macro path mode.
  • Added #5121: Locked axes mask.
  • Added #5139: Active user tool change procedure.
  • Added #5427: Tool type used for compensation.
  • Added new G10 L101 P
    V to set CNC internal parameters.
  • Added new M19: Spindle Orient (for supported firmware only).
  • Added new M34: Add axis to the interpolated group.
  • Added new M35: Remove axis from the interpolated group.
  • Added new M36: Unclamp axis (for supported firmware only).
  • Added new M37: Clamp axis (for supported firmware only).
  • Added new named parameter #.
  • Added new named parameter #.
  • Added new named parameter #.
  • Added new named parameter #.
  • Added new named parameter #.
  • Added new named parameter #.
  • Added new named parameter #
    .
  • Increased number of dynamic commands usable in a G-Code Program/Macro/MDI.
  • Changed named parameter # to #.
  • Changed named parameter # to #.
  • Changed named parameter # to #.
  • Changed named parameter # to #.
  • Changed named parameter # to #.
  • Improved G-Code compiling time when there are a lot of G38.x commands.
  • Fixed Block Delete management.
  • Fixed Macro encryption of large files.
  
  
• Improved 3D view management:
  
  • Added Tilting-Head A/B management.
  • Added view of Axes Arrows (new menu View -> Show Axes Arrows).
  • Added view of Axis-driving vector when Rotary Guide for Axis [A|B|C] is shown.
  • Added Zoom with CTRL+Mouse Y (normal) SHIFT+Mouse Y (reduced) to simplify trackbar use.
  • Fixed Grid management with Tilting-Head Kinematics.
  • Fixed Transparency of the Virtual Machine Geometries Edges.
  • Fixed Transparency management when creating a new Virtual Machine.
  • Fixed Virtual Machine Transparency value recovery when control software starts.
  
  
• Fixed Board Monitor -> Homing Correction Space visualization.
• Fixed G-Code Line in Execution & Last Line Executed visualization.
• Fixed Origin Mode to be always of type Custom with Rotary Axes for Table.
• Fixed Board Settings -> Axes -> Extra -> Cornering Acceleration Override default to 100%.
• Fixed Mouse issue when an M109/M120 dialog appears and the user is changing an OVR with the mouse.
• Fixed Control Software issue when pressing Tools Library OK button with CNC in SIMULATOR state.
• Fixed missing import of full data from settings.xml (CNC Board Settings) made with older versions.
• Fixed CNC dynamic info management to RESUME a stopped program also after a PC shutdown.
• Fixed visualization of Programmed Feed, Target Feed, Reference Feed in RUN/SIMULATOR state.
• Fixed Program Settings -> Access Level panel to avoid duplicate passwords between access levels.
• Fixed minor users reported issues.
• Added new firmware for Board-A/B 1.54:
  
  • Aligned features with INTERFACE LEVEL 9.
  • Added new Modbus Interface.
  • Added new Tilting-Head A/B Kinematics.
  • Added new commands for Orient Spindle.
  • Added a new Jog Mode to move along the tool.
  • Added new Order Code to control motor STEP/DIR up to 2Mhz.
  • Added Homing Index management
  • Added some new parameters to control new features.
  • Disabled RETRACT management when a STOP occurs during a TOOL CHANGE.
  • Improved G-Code BPS rate.
  • Improved Interpolator Engine.
  • Improved JOG with digital inputs to be more responsive.
  • Changed Board-A/B OS to version 1.12.38.

A short video of new bevel-head support:

This is my first post on this forum

I installed an old CNC milling machine with a controller Fanuc Series O-M.
The machine is a Milling Yeong Chin Machinery, Type: MAX-3HP

The system firmware version is 0469 - 10
The servo firmware version is 9046 - 09
The PMC (PLC in Fanuc speak) type is PMC A1 - 01

When I turn on the machine, I have the message :
1015 pot inp alarm

And, when I try to get the spindle running, I have the message:
1002 Zero point missed.
The table is homed correctly at x=0, y=0, z=0

All amplifiers indicate "ready" with a 0 error code.

Now, I am looking for the manual of this machine

Any help will be appreciated

Thanks for any help