cnczone.com BobCad-Cam

All the historic Post Processors have been deleted, I have a lead on a Lathe license for V25 but without a starting point for the Siemens Lathe Post Processor I'm not sure I have the enthusiasm to see it through! :D

Hello CNC Zone!

Over the last few months, our team has worked diligently to develop and release the new BobCAD Support site. The support website is redesigned to make it easier to find information about your BobCAD CAM software. In the past, all users needed to log into the support site to gain access to the knowledge base, recorded training events, and other information. The new site moves this information forward, helping you and your staff get up to speed faster with the BobCAD CAM software by making this information easier to access for all.

Key new areas of the site.

Recorded Virtual Events - https://bobcadsupport.com/training-r...irtual-events/

We host weekly live training events covering all topics BobCAD. Over the last year, we've built a library of these recorded training events. Using the above link gives you access to all the T1 training events.

Watch recorded training sessions for 2D/3D CAD CAM, 4 Axis machining and more.



Getting Started with Post Processing - https://bobcadsupport.com/post-proce...-with-posting/

This section of the support page provides resources new and existing users need to better understand what post processors are, what they do, and how to change them. This section also gives you access to download posts, request modification, and more.



New User Forum - https://forum.bobcad.com/

Social networks are popular, but many BobCAD customers prefer to communicate on a traditional forum ( just like cnc zone ). This community is the best place to communicate with other BobCAD users, Staff, even development. If you haven't joined our new user forum, do it today!



Knowledge Base - https://bobcadsupport.com/knowledgebase/

Search and find documentation on software topics, training, and post processors. Before you call support search our knowledge base for your solution.



Software Builds and Updates https://bobcadsupport.com/technical-...tware-updates/

Download installs, builds, and release notes for BobCAD CAM, BobCAM for SOLIDWORKS, BobCAM for RHINO



BobCAD-CAM offers 3 product families for you to choose from.

BobCAD-CAM V34
What's New
Toolpath Matrix
Version Comparison

BobCAM for SOLIDWORKS V9
What's New
Toolpath Matrix
Version Comparison

BobCAM for Rhino V1
What's New
Toolpath Matrix
Version Comparison

The software sat idle for a few years after our lathe hand moved on and we haven’t been able to find a replacement. So now I’ve been slowly going through everything and getting our Haas st25 going again. Before I updated it would post my finish passes with a g70 and just call the roughing canned cycle N numbers. Now when ever I try to post anything with a basic finish selected it leaves whatever stock was left in the roughing cycle and posts in separate lines no longer using the g70. I have double and triple checked every step and the post nothing has changed except me updating. Any help figuring this out would be greatly appreciated.

I'm trying to mark graduations on the bevelled edge of a disc? I'm making a degree vernier, how do I go about getting the lines on the bevel at the correct angle, the disc has a 60° bevel about .4 wide. The numbers would be good too but not essential.