Se encuentra usted aquí

Agregador de canales de noticias

best blade for ripping 8/4 white oak

sawmillcreek.org Main woodworking Forum - Jue, 08/12/2021 - 19:39
I'll be needing to rip some 8/4 white oak and would like to buy a dedicated
rip blade for my 10" Sawstop 3hp PCS. I'm guessing 24T, 20 degree hook,
FT grind, but I'm really out of my depth here. Would love to hear some recommendations.

The Sawstop people recommend staying away from blades with depth limiting shoulders, so
that might eliminate some blades, esp. Freud.

Forrest is saying things are delayed up to 5 months.

Thanks in advance! (.-.)

Another Oddball DC Fitting - 3D printed and Magnets

My old Delta shaper is mobile so I need to be able to disconnect the dust collector and stow it in the minimal space possible. I was originally using two 4" hoses to the combiner on the DC inlet. I've changed that to a single 6" inlet so I needed an efficient combiner attached to the tool that stayed within the outline of the top.

It's sort of possible with standard PVC fittings but I couldn't come up with anything that didn't have at least one badly convoluted path. The maximum allowed profile was also giving me trouble with a printed fitting. I eventually realized that magnetic couplers would solve that problem.

Shaper_5.jpgShaper_2.jpgShaper_3.jpgShaper_4.jpg Attached Images (.-.)

Monthly Dividend Stock In Focus: Chatham Lodging Trust

www.suredividend.com - Jue, 08/12/2021 - 19:00

Updated on August 12th, 2021 by Bob Ciura Real Estate Investment Trusts are popular investments among income investors, and for obvious reasons. They are required to pass along the vast majority of their earnings in order to retain a favorable tax structure, which often results in very high dividend yields across the asset class. You […]

The post Monthly Dividend Stock In Focus: Chatham Lodging Trust appeared first on Sure Dividend.

What do you know about In-line Industries?

sawmillcreek.org Main woodworking Forum - Jue, 08/12/2021 - 18:26
Matter of concern-placed an order for machined pulleys last week. Got the order# on the site. But no tracking, no way on the site to check order status. I sent a message through the site with a polite question about a timeline. No response. So I called. There are two numbers listed in the contact information on the bottom of the main page. No answer, no voice mail, nothing. The other #is either disconnected or it is a fast busy.
If it's a small or one man operation I can understand but at least fix it so I can communicate.
Do any of you have enlightenment on this?

edit: uh-oh. https://www.bbb.org/us/ma/webster/pr...111/complaints

Thanks,

Rich (.-.)

Top 10 cull sees Baillie Gifford US cut Tesla and lose Alphabet

Citiwyre Money - Jue, 08/12/2021 - 18:22
The best performing trust of last year has continued its stellar performance in 2021 as it shakes up its top holdings by cutting biggest position Tesla and selling Alphabet and Mastercard.

El Ibex 35 no logra asaltar los 9.000 puntos tras una sesión que cierra plano

Invertia Mercados - Jue, 08/12/2021 - 18:00

De las últimas nueve sesiones, solamente ha concluido en negativo la del pasado lunes.

Wanted at Palantir: the Incredible Hulk

Financial Times Technology - Jue, 08/12/2021 - 17:45
Turns out not even Palantir can escape Silicon Valley-speak.

Laminating countertops

sawmillcreek.org Main woodworking Forum - Jue, 08/12/2021 - 17:44
Hi,

I see some neat looking laminates out there. I have a potential customer that wants a 10 ft long desk with two L's that are 6 ft long. I first quoted him w/ 1/16" veneer & making my own veneer. It was certainly sticker shock, but I can't use thin veneer because I don't have a press big enough for the entire assembly and it would be too easy to get out of plane and sand thru the thin veneer.

So... he asked if I could use laminates. I started looking on YouTube and it doesn't seem much different than paper backed veneer. I also was searching around it seems there are some neat laminates out there. So getting this job, even if he prefers cheap laminate, could be good for me so that I can learn the process.

Is there actual high quality laminates? Without highly specialized equipment, can you do something like that shown below or do you need to buy from a vendor that specializes in forming laminations? Below is an example of something that I could be fun with my furniture. If you do go w/ a vendor, do you make the piece and have them form the laminate around your product?

Laminate.jpg Attached Images (.-.)

Cuba’s government approves small and medium-sized enterprises

The Economist The Americas - Jue, 08/12/2021 - 16:38
All the while it is still cracking down on protesters

Why Mozambique invited foreign troops to fight its jihadists

The Economist Middle East - Jue, 08/12/2021 - 16:38
Rwandan soldiers are rescuing a huge gas project. But the insurgents’ grievances still fester

Ghana plans to buy back oil licences no one wants

The Economist Middle East - Jue, 08/12/2021 - 16:38
Activists say the numbers don’t add up

A flood of vaccines for Tunisia as foreigners vie for influence

The Economist Middle East - Jue, 08/12/2021 - 16:38
Both Gulf states and western donors want to sway a beleaguered Arab democracy

Why so many French people fear dictatorship and civil war

The Economist Europe - Jue, 08/12/2021 - 16:38
Apocalyptic piffle is not just for Anglophones

Poland’s proposed media rules threaten press freedom

The Economist Europe - Jue, 08/12/2021 - 16:38
The independence of an American-owned television channel is in jeopardy

With just 15% fully jabbed, Bulgaria is giving away vaccine shots

The Economist Europe - Jue, 08/12/2021 - 16:38
Demand is so low that many doses are about to expire

Six Balkan nations keep trying to join the European Union

The Economist Europe - Jue, 08/12/2021 - 16:38
The club seems reluctant to let them in

The battle for north London’s public space

The Economist Britain - Jue, 08/12/2021 - 16:38
Boozing youngsters v the metropolitan elite

The British government’s unwanted higher-education boom

The Economist Britain - Jue, 08/12/2021 - 16:38
Ministers mostly have themselves to blame

Páginas

Suscribirse a cachivaches.cajael.com sindicador